Comprehensive Insights on Assessment Validation and Validating Assessments

Comprehensive Insights on Assessment Validation and Validating Assessments

Blog Article

With registration, RTOs must juggle many responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, where validation often causes the most anxiety.

Even though we’ve written about validation several times, let's revisit its definition. ASQA calls validation a quality review of the assessment process.

Simply put, validation confirms which aspects of an RTO's assessment process are right and identifies where improvements are needed. A clear understanding of its main components makes it less intimidating.

As per the 2015 SRTOs Clause 1.8, RTOs are required to ensure their assessment systems, including RPL, meet training package requirements and follow the Principles of Assessment and Rules of Evidence.

The standards necessitate conducting two types of validation.

The initial type of assessment validation ensures compliance with the training package assessment requirements within your RTO's scope.

The second validation ensures assessments are conducted according to the principles of assessment and rules of evidence.

Thus, validation is performed both prior to and following the assessment. The first type, assessment tool validation, is the focus here.

Breaking Down the Two Types of Assessment Validation

Exploring the Concept of Assessment Validation

As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.

On the other side, post-assessment validation pertains to the implementation, requiring Registered Training Organisations to adhere to the Principles of Assessment and Rules of Evidence.

We will dedicate this article to assessment tool validation.

How Assessment Tool Validation is Conducted

Having outlined the two types of validation, it’s time to dive into assessment tool validation.

Optimal Timing for Assessment Tool Validation

The aim of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.

Therefore, any time you obtain new learning resources, assessment tool validation should be completed before students use them.

You don’t have to wait for the next scheduled validation in your 5-year cycle. Validate new resources right away to ensure they are ready for students.

However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:

- you update your resources
- when new training products are added on scope
- review your course against training product updates
- identify your learning resources as a risk during your risk assessment

The Australian Skills Quality Authority's risk-based approach to regulation means RTOs must conduct regular risk assessments. Complaints from students about learning resources signal the need for assessment tool validation.

Which Training Products to Validate?

Bear in mind, this validation is meant to ensure all learning resources are compliant before use. All RTOs are required to validate all unit resources.

Resources Required for Assessment Tool Validation

Educational Resources

To conduct assessment tool validation, you will need the entire suite of your learning resources:

Mapping tool – the first document to review. It indicates which assessment items meet unit requirements, aiding in faster validation.

Learner/student workbook – ensure it's appropriate as an assessment tool. Check if the instructions are clear and answer fields are adequate. This is a frequent issue.

Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item exist. Clear benchmarks are crucial for reliable assessment outcomes.

Other related resources – may include checklists, registers, and templates developed separately from the workbook and marking guide. Validate these to ensure they suit the assessment task and address unit requirements.

Panel of Validators

Clause 1.11 defines the requirements for validation panel members, stating validation can involve one or more individuals. RTOs usually require all trainers and assessors to be present, sometimes including industry experts.

Overall, your validation panel should have:

Vocational competencies and current industry skills that relate to the unit being validated

Current expertise and skills in vocational teaching and learning

Either of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or its updated version

Assessment validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists with the validation process and documentation. It makes it easier to view how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also acts as evidence that you have validated your resources prior to student use.

ASQA does not specify a recommended or required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools in their entirety to ensure they meet the principles of assessment.

Assessment Principles Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While such templates facilitate validation, they often result in judgment errors because there’s insufficient space for comments on each assessment item.

It is highly advisable to use a more detailed template for evaluating each unit requirement and its corresponding assessment items. Below is an example:

Element Performance Criteria Assessment Directions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Needs Checking?

As mentioned in our blog post Common Problems In Assessment Tools, you need to ensure that your assessment tools allow trainers to follow assessment principles and evidence rules.

Basic Principles of Assessment
Fairness – Is the assessment process equitable and accessible to everyone?

Flexibility – Does the assessment accommodate different options to demonstrate competence according to various needs and preferences?

Validity – Does the assessment evaluate what it is meant to evaluate? Is it a valid tool for measuring the required skill or knowledge?

Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?

Essential Rules of Evidence

Validity – Is the evidence confirming that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to confirm the learner has the required skills and knowledge?

Authenticity – Does the assessment tool ensure that the work belongs to the candidate?

Currency – Do the assessment tools correspond to current units of competency and industry practices?

Despite being regularly covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.

To avoid employing learning resources that leave unit requirements unmet, be sure to adhere to these guidelines:

Demonstrate What You Teach

Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Carry out each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:

nappy change

prepare bottles, bottle-feed babies and sanitize equipment

prepare solids and feed babies

respond suitably to baby signs and cues

prepare infants for sleep and soothe them

monitor and encourage physical exploration and gross motor skills suitable for the age

Having students explain the process of nappy changing for babies under 12 months doesn’t meet the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Look Out for Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at read more least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.

Full Compliance or Not Competent

Pay attention to lists. As noted earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity

Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?

Possible answers include:

Necessary materials

Corresponding costs

Time span of activities

Designated duties and responsibilities

If an assessment item calls for several answers, specify the number of answers needed from a student. This ensures your assessment is reliable, and the evidence gathered is valid.

This also applies to assessment items with double-barrelled questions or those that ask for multiple answers at once. These can confuse students and assessors, as shown in the sample question below:

Name a hazard and/or environmental concern in the workplace and choose the most effective hazard control hierarchy.

Possible answers include, but are not limited to:

Weather conditions – isolating the work area, engineering, personal protective equipment

Work area and ground conditions – elimination, isolating, engineering controls

People – isolation, engineering controls, administrative controls

Structural hazards – substituting, isolation, use of engineering controls

Chemical hazards – isolation, use of engineering controls, administrative controls

Equipment or machinery – isolation, engineering controls, administrative controls

Avoiding double-barrelled questions makes it simpler for students to respond and for assessors to accurately judge competence.

Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” However, such guarantees require you to wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant approach.